LLT SAP Notes: 
--------------

How to restart GAB and LLT without rebooting the system 
TechNote ID: 233032  
: http://support.veritas.com/docs/233032

When using a value other than the default for LLT SAP, 
configured via the /etc/llttab file, LLT communications will fail. 
(As example only). 
TechNote ID: 257289  
http://support.veritas.com/docs/257289

Other LLT Docs
-----------------
Document ID: 234740 
http://support.veritas.com/docs/234740 

LLT & GAB FAQ
http://seer.support.veritas.com/docs/245518.htm 

Document ID: 257289 
http://support.veritas.com/docs/257289 
When using a value other than the default 0xCAFE value for LLT SAP, 
configured via the /etc/llttab file, LLT communications will fail. 


The default SAP is hex 0xCAFE. 

To change, say qfe0, enter the following on each node of the clsuter. 
(All nodes must have qfe0 on the same independent network.) 
Entry from /etc/llttab: 
	link qfe0 /dev/qfe:0 - - ether - 
Commands: 
	lltconfig -u qfe0
	lltconfig -t qfe0 -d /dev/qfe:0 -b ether -s 0x0200

SAP's can be confirmed with "/sbin/lltstat -l". 




Pamela Pledger		Email: ppledger@veritas.com
Tech Support Engineer 	Phone: 650-527-0446
VERITAS Software	Spt Hotline: 1-800-342-0652
	   Normal Work Hours 9am-6pm PST                
- - - - - - - - - - - - - - - - - - - - - - - - - -
For a status on your case? See "View My Case"
    at http://support.veritas.com/viewcase 
---------------------------------------------------