* vxfs_START -- do not remove the following lines:
*
* VxFS requires a stack size greater than the default 8K.
* The following values allow the kernel stack size
* for all threads to be increased to 16K.
*
set lwp_default_stksize=0x4000
set rpcmod:svc_run_stksize=0x4000
* vxfs_END
* vxvm_START (do not remove)
forceload: drv/atf
forceload: drv/pln
forceload: drv/ses
* DIsable DMP until fiber hubs are supported
*forceload: drv/vxdmp
forceload: drv/vxio
forceload: drv/vxspec
forceload: drv/sd
forceload: drv/QLGC,isp
forceload: drv/sbus
forceload: drv/ssd
forceload: drv/sf
forceload: drv/soc
forceload: drv/socal
rootdev:/pseudo/vxio@0:0
set vxio:vol_rootdev_is_volume=1
* vxvm_END (do not remove)
*
*       set kernel level parameters for TUXEDO
*
        set shmsys:shminfo_shmmax=442176000
        set shmsys:shminfo_shmmin=1
        set shmsys:shminfo_shmmni=8144
        set shmsys:shminfo_shmseg=2048
*
        set semsys:seminfo_semmni=7168
        set semsys:seminfo_semmsl=2048
        set semsys:seminfo_semmap=7168
        set semsys:seminfo_semmnu=2048
        set semsys:seminfo_semmns=12192
        set semsys:seminfo_semume=2048
        set semsys:seminfo_semopm=32
*
        set msgsys:msginfo_msgmni=6144
        set msgsys:msginfo_msgmap=16384
        set msgsys:msginfo_msgmax=65536
        set msgsys:msginfo_msgmnb=131072
        set msgsys:msginfo_msgssz=32
        set msgsys:msginfo_msgtql=200
        set msgsys:msginfo_msgseg=16384

set bufhwm = 10240
set ncsize = 16000
set ufs_ninode = 16000
set maxphys = 8388608
set pt_cnt = 256
set nfssrv:nfs_portmon = 1
set st:st_io_time=240
*
*
* Force 100mbps half duplex (12/29/98 TR)
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100fdx_cap=0
set hme:hme_adv_100hdx_cap=1

set snooping=1
set obpdebug=1
set nopanicdebug=1